Canan

Hi, I'm Canan

Oups ...

Never forget impossible is possible

:(


Your PC ran into a problem and needs to restart.
We're just collecting some error info, and then we'll restart for you.


0% complete



QR Code

For more information about this issue and possible fixes, visit
https://www.windows.com/stopcode

If you call a support person, give them this info:
Stop code: SYSTEM_SERVICE_EXCEPTION

Update CFW

Update CFW

Nintendo




Steps

  1. Make a backup (on the Switch and copy to PC) of all your games with Checkpoint with "Hold Y" to select everything and "Press L" to save everything
  2. > Hold R while launching any game
  3. /!\ Remember to sort so as not to have too many versions of your saves of the same game
  4. Update the RCM Loader (using the "hekate_ctcaer_x.x.x.bin" after renaming it to "payload.bin")
  5. /!\ Rename the file "hekate_ctcaer_x.x.x.bin" to "payload.bin" and put it in the folder "\ATMOSPHERE_HEKATE\payload.bin" of the RCM Loader
  6. /!\ If with chip, put it in the root of the microSD and no need for RCM Loader
  7. Download the desired firmware (take the most recent) and unzip everything into the "Firmware xx.x.x" folder at the root of your micro SD
  8. /!\ Check that Atmosphere is compatible with the desired firmware, otherwise no CFW possible
  9. Update your Atmosphere + Fusee + Hekate + Sigpatches to the latest version to support the desired firmware
  10. /!\ The fusee.bin corresponding to the AMS version must be in "/bootloader/payloads/"
  11. Launch Daybreak via hbmenu
  12. /!\ Not compatible with Applet mode, so you must launch a game in Full mode before (hold R when launching any game and the Applet Mode in red will disappear on the next launch)
  13. Select "Install"
  14. Select the "Firmware xx.x.x" folder at the root of your micro SD (after unarchiving it)
  15. /!\ If the update is valid, then you can continue
  16. Select "Preserve settings"
  17. Select "Install FAT32 + exFAT", then "Continue"
  18. /!\ If you were to install the FAT32 version while your micro SD is formatted in exFAT, Atmosphère will no longer start
  19. You can restart
  20. /!\ No need for the RCM Loader to do this, just wait (if nothing after a long time, then start it in CFW mode because it may have just shut down instead of restarting)
  21. Delete the "Firmware xx.x.x" folder at the root of the microSD
  22. /!\ First check in the console settings the version
  23. Install Tinfoil again (via the auto installer in the hbmenu)
  24. > Hold R while launching any game
  25. /!\ If there is an error, use "Tinwoo" (the same way) to install the Tinfoil NSP (XCI folder) on the SDCard (accepting the NCA)

Warning

  1. If you have an SX Core chip, then copy paste the "hekate_ctcaer_x.x.x.bin" into "\payload.bin" so that the "boot.ini" can use it