Canan

Hi, I'm Canan

Oups ...

Never forget impossible is possible

:(


Your PC ran into a problem and needs to restart.
We're just collecting some error info, and then we'll restart for you.


0% complete



QR Code

For more information about this issue and possible fixes, visit
https://www.windows.com/stopcode

If you call a support person, give them this info:
Stop code: SYSTEM_SERVICE_EXCEPTION

Image to Lithography

Image to Lithography

Ender 3 Pro




Steps

Profil

  1. Download "Cura 4.0 - Ender 3 - Gadunky.com - Lithophane settings - v2.curaprofile" (or newest) file at
  2. Gadunky site
  3. https://www.gadunky.com/litho-print-settings/

Model

  1. Go to 3DP site
  2. http://3dp.rocks/lithophane/
  3. > Images
  4. Select yours (e.g.: Landscape photo)
  5. > Model
  6. Select yours (e.g.: Outer Curve)
  7. > Settings -> Model settings
  8. Maximum Size (MM) : 100
  9. Thickness (MM) : 2
  10. Border (MM) : 0
  11. Thinnest Layer (MM) : 0.4
  12. Vectors Per Pixel : 4
  13. Base/Stand Depth : 0
  14. Curve : 0
  15. > Settings -> Image settings
  16. Select "Positive Image"
  17. Select "Mirror Image Off"
  18. Select "Flip Image Off"
  19. Select "Refresh on Image Click"
  20. Repeat X Count : 1
  21. Repeat Y Count : 1
  22. Select "Mirror Repeat Off"
  23. Select "Flip Repeat Off"
  24. > Model -> Download (STL file)

Print

  1. Open STL model in Cura, then:
  2. > Preferences -> Profiles (CTRL+J)
  3. Import "Cura 4.0 - Ender 3 - Gadunky.com - Lithophane settings - v2.curaprofile"
  4. Select "Discard" to keep the file options
  5. > Select the profile in top right corner (via custom button)
  6. Layer Height : 0.12 mm
  7. Infill Density : 99%
  8. Build Plate Temperature : 50°C
  9. Enable Retractation : Checked
  10. Retraction Distance : 7.0mm
  11. Print Speed : 30mm
  12. Generate Support : Unchecked
  13. Build Plate Adhesion Type : Brim
  14. /!\ Normally profil changements are save, so not need to redo next time!

Warning

  1. Only White filament (or other lite color)