Steps

Agaves

1. Remove all the small agave

Planting an Agave in a pot (si besoin)

1. Drill the bottom (holes already defined)
2. Fill the bottom with red gravel to have approximately 10 cm (so that you can no longer see the stop)
3. Fill with a mixture of sand (to drain water) and planting soil up to 10 cm from the top
4. Add the agave and add the mixture

Japanese maple

1. Prune after the Japanese maple leaves have fallen

Calisenum and oleander

1. Coated if temperature approaches negative

Sages

1. Prune to the height of the wood in the vegetable garden (so approximately 10 cm)

Palm trees

1. Cut a row (in April) or Pineapple, in both cases with special leather gloves covering the forearms and with the shears

Lagerstroemia

1. Prune them in December
2. If new wood is cut a few centimeters apart, then it will be thicker and taller
3. If old wood is cut (therefore under the knot of the new ones), then it will be less dense and high

Hole to plant and/or remove a tree/lawn

1. A spade shovel (so pointed)
2. Planting soil
3. Lawn seed

Banana trees

1. Cut with a curved saw less than 10cm from the base in February or March (when they are all brown, because dry)
2. /!\ Let the periods of frost pass, because the heart will be protected, unlike if we cut them before

Cannes

1. Cut with shears less than 10cm from the base in February or March (when they are all brown, because dry)
2. /!\ Let the periods of frost pass, because the heart will be protected, unlike if we cut them before

Eucalyptus and Oleander

1. Cut at the base small and medium branches that are too low or that extend anywhere (end of November)

Recycling

1. Avoid Tuesday (first day of opening), Friday (RTT day) and Saturday (first day of the weekend)

Driveway borders

1. Deck board keeping the stakes in place of the small barriers (or new stakes more spaced apart)
2. Purchase of LED strip to attach to it (or other solar) to illuminate everything
3. (see with Marc for the iron sawmill)

Clay plates

1. Remove clay patches and weeds underneath
2. Then mix soil and planting soil
3. Sow the seeds and tamp everything down